Install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005 – How To

In this guide checkout how to install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005 – How To

CWM and TWRP Custom Recoveries are now available for Galaxy Note 3 LTE N9005. If you are looking forward to install Custom Recovery on your Galaxy Note 3 LTE N9005, so that you can Root Galaxy Note 3 LTE N9005, Install Custom ROM’s, Kernel’s, Create a backup of your current ROM or Android System etc. then you can follow this guide and successfully install your desired Custom Recovery either CWM / TWRP Recovery on Galaxy Note 3 LTE N9005.

Before proceeding to Install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005, let’s have a quick look at some of the pre requisites that must be followed to prepare your device for the Installation Process and also to avoid it from any accidental damages.

Pre Requisites:

  • Backup all of your data to a safe location, so that it can be restored if any of your data is lost during installation process.
  • Make sure USB Debugging is turned on in the Developer Options. You can check it in settings > Developer Options > USB Debugging.
  • Make sure charge on your device is at least 75%, as it will avoid your device from turning of in between the installation process. If your device is turned off in between the installation process it may brick your device.
  • Make sure your device is Galaxy Note 3 LTE N9005. Do try it on any other Galaxy Note 3 variants.
  • Download and install USB Drivers on your PC from here.

Assuming that you are done with all the above listed requisites, let’s now proceed to Install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005.

Disclaimer: We should not be held liable or responsible in manner for any damage occurred to your Galaxy Note 3 LTE N9005. So understand the risk involved and proceed further at your own risk.

Procedure to Install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005:

  • Download your favourite Custom Recovery from the below links:

[box type=download]

CWMClockworkMod Recovery 6

TWRP – TWRP 2.7.0.2 Touch Recovery

[/box]

  • Download Odin software from here to your PC.
  • Open Odin on your PC as administrator.
  • Power off Galaxy Note 3 LTE N9005.
  • Now enter into Download Mode. To so press and hold Volume Down + Home + Power buttons simultaneously until you see some warning text. Now press Volume Up to enter into Download Mode.
  • Once you are in Download Mode, connect your device to PC using original USB Data Cable.
  • Now you will see that the ID:COM box in Odin will turn blue and “Added” message will also appear in Odin.
  • Now click on PDA or AP and select the downloaded Custom Recovery Package.
  • Make sure only Auto Reboot and F.Reset Time are only checked in Odin and remaining all options are unchecked.
  • Now click on Start, this will flash the Custom Recovery on your device.
  • Once done you will see success message in Odin and also your device will reboot automatically.
  • Once booted up, power off Galaxy Note 3 LTE N9005.
  • Now enter into Recovery Mode. To do so press and hold Volume Up + Home + Power buttons simultaneously until you see some text on screen.
  • Now you will see that you are in either CWM / TWRP Recovery, which you have installed.

That’s all now you have successfully installed CWM / TWRP Recovery on Galaxy Note 3 LTE N9005. Do let us know in the comment section if you face any issues while trying to install CWM / TWRP Recovery on Galaxy Note 3 LTE N9005. Also subscribe to our Email News Letter to receive Tech Updates to your Inbox.