Update Galaxy Star Duos GT-S5282 to Android 4.1.2 JB XXANF4 official firmware – How to

Samsung’s one of the cheapest Android Smartphone named Galaxy Star Duos, was the huge success in the Asian countries. Many of the Android lovers are still using device as their primary device. If you are one of the owner of this device and if your device is soft bricked then don’t worry, just follow this guide and restore your device to normal state. Here in this guide we are going to update Galaxy Star Duos GT-S5282 to Android 4.1.2 Jelly Bean official firmware, flashing this firmware can surely restore your soft bricked Galaxy Star Duos.

Firmware Details:

[box type=”shadow” ]

  • PDA: S5282XXANF4
  • CSC: S5282OLBANF1
  • MODEM: S5282DXAMH2
  • CHANGELIST: 1401752
  • BUILD DATE: 25.06.2014

[/box]

But before proceeding to update Galaxy Star Duos GT-S5282 to Android 4.1.2 Jelly Bean, let’s have a quick look at some of the pre requisites to follow to avoid further bricking of your device and also to prepare it for the update process.

Pre Requisites:

  • If you are able to access your data then do a backup of it to a safe location.
  • Charge your device to at least 75%, to avoid it from turning off in between the update process, if happened it may further damage your device.
  • Make sure USB Debugging is enabled on your device.
  • Download and install USB Drivers for your device on PC from here.

Once you are done with all the above listed requisites, you are now ready to go and update Galaxy Star Duos GT-S5282 to Android 4.1.2 Jelly Bean firmware.

Hoow to Update Galaxy Star Duos GT-S5282 to Android 4.1.2 Jelly Bean firmware:

Download Odin Software and Download and extract the firmware package from here to your PC. [Link] [Mirror] Open Odin in PC as administrator. Power off Galaxy Star Duos GT-S5282.

Enter into Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously until you see some warning text on screen. Now press Volume Up to enter into Download Mode.Connect your device to PC using original data cable.

Now in Odin under ID:COM colour changes to blue, and an “Added” message will appear in Odin, indicating that your device is successfully connected to PC.

Now in Odin, click on PDA or AP and load the firmware with .tar or .md5 extension, in the similar way click on Modem and load the file with .modem extension, and click on CSC and load file with .CSC extension. In the same manner select all the files in Odin.

When done click on Start, this will flash the firmware files on your device. Once done your device will reboot automatically. Now you will see that your device will boot up successfully.