Update Galaxy Note 2 LTE N7105 to Android 4.4.2 Kitkat XXUFNG4 Firmware

Samsung Galaxy Note 2 LTE N7105 is updated to Android 4.4.2 Kitkat update and the update is rolled out via OTA. If you haven’t updated your device or facing trouble updating your device to Android 4.4.2 Kitkat firmware then follow this guide and manually update Kitkat XXUFNG4 official firmware.

update Galaxy Note 2 LTE N7105 to Android 4.4.2 Kitkat XXUFNG4

Firmware Details:

  • Model: GT-N7105
  • Model name: GALAXY Note II LTE
  • Country: Singapore
  • Version: Android 4.4.2
  • Changelist: 1398348
  • Build date: Thu, 31 Jul 2014 10:38:26 +0000
  • Product Code: XSP
  • PDA: N7105XXUFNG4
  • CSC: N7105OLBFNG1
  • MODEM: N7105XXUFND3

Pre-Requisites:

  • Download and install USB drivers for Galaxy Note 3 in your computer.
  • Make sure to take backup of any important files on your smartphone.
  • Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
  • Ensure that your Samsung Galaxy Note 3 carries more than 70% of charge.

How to update Galaxy Note 2 LTE to Android 4.3 Jelly Bean UBUGNG1 Firmware

Step 1 – Download Android 4.4 and Odin software from below download section.

Step 2 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 3 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 4 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 5 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘AP/PDA’ and select file with ‘CODE’ in its name.
  • Click on ‘CP/Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 6 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 7 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 8 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

Download Section:

Odin Software

Android 4.4 KitKat firmware